Why You Need a Star Tracker: Guide to the Sky-Watcher Adventurer GTI

Written By Nakul Bhatnagar

Understanding the Need for Star Tracking

When you're first starting in astrophotography, you might wonder why you can't simply point your camera at the sky and take a long exposure. The answer lies in Earth's rotation. As our planet spins, the stars appear to move across the night sky, creating star trails in long exposures. While star trails can be beautiful, they're not what we want when photographing deep-sky objects like galaxies and nebulae.

This is where the Sky-Watcher Adventurer GTI comes in. This compact yet powerful star tracker compensates for Earth's rotation by moving your camera in the opposite direction at precisely the right speed.

The Mathematics Behind Star Tracking

Earth completes one rotation in approximately 23 hours, 56 minutes, and 4 seconds (a sidereal day). This means that without tracking:

  • At 14mm focal length: Maximum exposure ≈ 257 seconds

  • At 100mm focal length: Maximum exposure ≈ 36 seconds

  • At 400mm focal length: Maximum exposure ≈ 9 seconds

With the Sky-Watcher Adventurer GTI, you can extend these exposures to several minutes, dramatically improving your signal-to-noise ratio and capturing faint deep-sky details.

Setting Up Your Sky-Watcher Adventurer GTI

Essential Equipment

  1. Sky-Watcher Adventurer GTI mount

  2. Sturdy tripod (essential for stability)

  3. Counterweight shaft and weights (for balanced loads)

  4. Polar scope (included)

  5. Smartphone with polar alignment app (optional but recommended)

Initial Setup Process

  1. Tripod Setup

    • Choose solid, level ground

    • Extend legs to a comfortable working height

    • Ensure the tripod is as stable as possible

    • Level the tripod using its built-in bubble level

  2. Mount Installation

    • Attach the GTI to your tripod's mounting plate

    • Verify it's securely fastened

    • Install the counterweight shaft if needed

    • Add appropriate counterweights for your setup

The Art of Polar Alignment

Why Polar Alignment Matters

Proper polar alignment is crucial because it ensures your mount's rotation axis is parallel to Earth's axis of rotation. Poor alignment results in field rotation, which no amount of post-processing can fix.

Step-by-Step Polar Alignment Process

  1. Rough Alignment

    • Point the mount's polar axis approximately toward Polaris

    • Use the latitude scale to set your location's latitude

    • Adjust azimuth (left/right) to roughly center Polaris

  2. Fine Polar Alignment Using the Polar Scope

    • Remove the polar scope cover

    • Power on the mount

    • Illuminate the reticle using the mount's built-in LED

    • Rotate the polar scope to align the reticle properly

    • Place Polaris in the correct position on the reticle based on current time

    • Use the latitude and azimuth adjustments for precise positioning

  3. Using Polar Alignment Apps

    • Download a polar alignment app (PS Align Pro recommended)

    • Enter your location and time

    • Follow the app's guidance for precise Polaris positioning

    • Cross-reference with polar scope view

Polar Alignment Tips and Tricks

  1. Before You Start

    • Arrive at your location before dark to set up

    • Ensure clear view of Polaris

    • Level tripod carefully

    • Remove camera before alignment

  2. During Alignment

    • Make altitude adjustments first

    • Follow with azimuth adjustments

    • Tighten all knobs gradually

    • Recheck alignment after tightening

  3. Common Mistakes to Avoid

    • Forgetting to level the tripod

    • Not accounting for true local time

    • Moving mount after alignment

    • Using incorrect latitude setting

Balancing Your Equipment

Why Balance Matters

Proper balance reduces strain on the mount's motors and improves tracking accuracy. An unbalanced setup can cause:

  • Irregular tracking

  • Motor stress

  • Reduced battery life

  • Potential gear damage

Balancing Process

  1. Declination Balance

    • Loosen Dec. clutch

    • Position camera parallel to mount axis

    • Adjust camera position until it stays in place

    • Tighten Dec. clutch

  2. Right Ascension Balance

    • Loosen R.A. clutch

    • Position camera perpendicular to mount axis

    • Adjust counterweight until balanced

    • Tighten R.A. clutch

Troubleshooting Common Issues

Tracking Problems

  • Elongated Stars: Check polar alignment and balance

  • Periodic Error: Normal for this class of mount, use shorter exposures

  • Drift: Verify polar alignment and equipment balance

Mechanical Issues

  • Sticky Movement: Check for overtightened clutches

  • Unusual Noises: Inspect gear mesh and bearing movement

  • Battery Drainage: Balance load and check for obstructions

Advanced Features of the GTI

GoTo Capabilities

  • Built-in database of celestial objects

  • WiFi connectivity for smartphone control

  • Multi-star alignment options

Tracking Modes

  1. Sidereal: For stars and deep-sky objects

  2. Lunar: For moon photography

  3. Solar: For solar photography (with proper filters)

  4. Custom: For comets and other objects

Maintenance and Care

Regular Maintenance

  1. Keep gears clean and free of debris

  2. Check and tighten screws periodically

  3. Protect from moisture and dust

  4. Store in a dry place

Transportation

  • Use original packaging when possible

  • Protect sensitive components

  • Remove batteries for long-term storage

  • Keep polar scope caps on

Conclusion

The Sky-Watcher Adventurer GTI is an excellent tool for astrophotography, but its effectiveness depends entirely on proper setup and alignment. Take time to master polar alignment, and you'll be rewarded with pinpoint stars and beautiful deep-sky images.

Remember that practice makes perfect - don't get discouraged if your first few attempts aren't perfect. Keep refining your technique, and you'll soon be capturing amazing astronomical images.

Clear skies and steady tracking!

Nakul Bhatnagar
Next

Getting Started with Astrophotography: A Beginner's Guide